WELOCK Keypad Lock PCB51
Secure Your Families

WELOCK Smart Lock Compatibility Checker

A WELOCK Euro-profile smart cylinder may fit your door if the cylinder profile, exterior and interior dimensions, and clearance around the panel and knobs meet the requirements for the selected model. Check all three sections below before ordering. Matching the total door thickness alone does not confirm compatibility.

Check Your Door Before Choosing a Model

Follow the three checks below and record your measurements in millimetres. Then compare your results with the installation requirements for the WELOCK model you are considering.

Step 1: Identify Your Cylinder Profile

This guide covers WELOCK smart cylinders for compatible Euro-profile doors. Compare your existing cylinder with the Euro-profile shape shown in the diagram.

If your door uses a different cylinder profile or lock format, contact us to check the available options.

Compatible Euro profile cylinder shapes for WELOCK smart locks
How to measure door thickness and Euro cylinder length

Step 2: Measure the Exterior and Interior Dimensions

Measure the full thickness of your door, including any cover plates or rosettes on both sides. This helps you choose the correct smart lock cylinder size and avoid installation problems.

A = the cylinder length on the outside
B = the cylinder length on the inside
C = the total door thickness, including fittings where applicable

Step 3: Check the Door Backset

Measure from the door edge to the cylinder centre (backset). On both sides, check that the panel and knobs can operate without touching the frame, handle or fittings, including as the door opens and closes.

Compare these checks with your chosen model’s installation diagram.

How to measure door backset for a WELOCK smart lock cylinder

Compare WELOCK Smart Lock Compatibility

Select two WELOCK models to compare their installation requirements and access features.

Products
Cylinder Type
Standard Cylinder Configuration
Door Thickness
Minimum Backset
Bluetooth Access
Fingerprint Access
PIN Code Access
Temporary Passcodes
WELOCK App Access
Remote Unlocking via WiFiBox3
Amazon Alexa via WiFiBox3
Home Assistant via WiFiBox3
RFID Smart Card 
USB-C Emergency Power
Mechanical key
Battery Life
Waterproof

Need Help Checking Your Door?

Send photos of your door’s outside, inside and edge, plus your measurements and preferred model, to [email protected].

Does Your Door Use a Different Lock Format?

Explore other WELOCK options below. Check each model’s installation requirements, as the Euro-profile measurements above do not apply.

WELOCK Smart Cylinder Compatibility FAQs

Compare the shape of your existing cylinder with the Euro-profile diagram on this page. The door material or handle style alone does not identify the cylinder profile. If you are unsure, send us photos of the cylinder area and door edge.

Record the exterior and interior installation measurements separately, including the relevant door fittings. Check the backset and clearance around the panel and knobs as well. Compare each measurement with the installation requirements for the exact model you want to order.

Include fittings that affect the installation dimensions or available space. A thick escutcheon, protective fitting or recessed cylinder can affect compatibility even when the door panel itself is within the stated thickness range.

Backset and knob clearance are different checks. Backset measures from the door edge to the cylinder centre. Knob clearance concerns the space around the smart lock’s panel and knobs. Follow the selected model’s installation diagram to check both correctly.

In many cases, yes. If your apartment door uses a compatible Euro-profile cylinder and the measurements fall within the supported range, a WELOCK smart lock cylinder is a good fit. A quick compatibility check is the best way to be sure.

That is completely fine. Start by checking the door thickness and looking at the cylinder type. If anything is unclear, you can also send a photo and a few basic measurements to the WELOCK support team at [email protected] for help confirming fit.

In many standard Euro-profile door setups, yes. A smart lock cylinder is usually designed to replace the existing cylinder, so installation is often simpler than expected.

Yes, in many cases it can, but available space around the handle, escutcheon, or cylinder area should be checked first. If your door has tight clearance, measuring carefully or sending a photo to the support team [email protected] can help confirm whether a WELOCK smart lock cylinder is a good fit.